4.2.4 When the motor is rolling up the plastics, the pipe arrives at the required
position, at this time rotate the knob which controls the rolling status
and make the gear pin touch the micro switch( with click sound), hold
on and fasten the lock bolt by a cross head screw-driver.
4.2.5 When the motor is rolling down the plastics, the pipe arrives at the required
position, at this time rotate the knob which controls the rolling status
and make the gear pin touch the micro switch( with click sound) , hold on
and fasten the lock bolt by a cross head screw-driver.
4.2.6 The above steps would set up the motor’s limit range. Turnon the power
and check if the range setup is correct. If it is not correct, please review
the manual carefully and do the setup again.
5. Maintenance
5.1 Check the bolts on each connection regularly. Replace the bolts which is
deformed or snapped.
5.2 No need to refill the gear oil during the life duration of this product.
5.3 This product could be used for greenhouse rolling ventilation and curtaining
system. For other usage, please consult our company first.
±24V POWER SUPPLY
24V DC MOTOR
24V Power Supply
Control Switch
Power Supply For Electric Winch
24V DC
Motor
Connecting Diagram
A
2.3. Circuit diagram
3
8
