AUTO ANSWER
Combination is needed to enter BS setting; the default combination is “0000”
The user is able to set 5 sets of auto answer numbers.
Press MENU/SELECT key, then using
▲
or
▼
key to select “NUMBER” item.
Press MENU/SELECT key to enter.
Enter the number to be stored by using the alphanumeric keys
Press MENU/SELECT key to confirm, a sound will be heard once the setting
succeeds.
REGISTRATION
This function allows the user to register a pendant to a specified base.
Press MENU/SELECT key, then using
▲
or
▼
key to select “REGISTRATION” item.
Press MENU/SELECT key to confirm, “SEARCHING’’ will flash on the display.
Press and hold the red button on the pendant for 7 seconds.
The white light on pendant will flash during registration
If the base is found, and the pendant is successfully registered, a tone will sound, white
light on the pendant will stop flashing and the base will return to standby mode.
The Base assigns a number to the Pendant such as “PENDT 1”.
If the base isn’t found or the pendant fail to register, “SEARCHING” will keep flashing on
the display and white light will keep flashing on the pendant until exit of registration
menu.
Note: in new pendant registration, please wait for 5 seconds before pressing SOS on
the pendant.
