background image

   

Press 

   to select option, function include number edit, transfer

       to phonebook and delete record
   

Press [       ] key to return to standby mode

5. Set music ringer

    To select external call music ringer, enter setup mode, go to profile menu,
    select set handset ringer. Then select music group of default, VIP, family,
    friend or colleague, browse music melody by pressing [ 

 ] or [ 

 ] key.

    Press [ OK/MENU ] to confirm selection and return to music group menu.
    Total number of song for selection can be define at EEPROM parameter,
    maximum selectable song is 32. Song number 1~20 are NS's royalty, song
    21~30 are classical music for which will have royalty issue that customer
    should take care. 
    To select internal call music ringer, enter setup mode, go to profile menu,
    select set page tone. Then browse music tone (1-4) by pressing [ 

 ] or [ 

 ] 

    key, press [ OK/MENU ] to confirm selection.

6. Ringer volume, Ringer filter and Ringer off select

    1. To set external or internal call ringer volume, enter setup mode, go to
        profile menu, select set handset ringer, then select volume. User can set
        ringer volume level from 1 to 6, or set ringer off.
    2. To temporary turn off ringer at sleep time, enter setup mode, go to
        function menu, select set non-disturb. User can set temporary ringer off
        period from 1 to 16 hours. After this period, ringer will resume to normal.
        A shortcut key for 8 hours non-disturb is provided by hold [     ] key for 2
        second at standby mode, or hold [     ] key again to release non-disturb
        function.
    3. To active ring filter for external call, user should assign external call
        number in phonebook music group. Then enter setup mode, go to profile
        menu, select music group for ringer filter, set ringer off for assigned group.

7. Audio volume control

    To change speakerphone volume, press [ 

 ] , [ 

 ] key at speakerphone

    mode.
    To change receiver volume, press [ 

 ] , [ 

 ] key at earpieces mode. 

    To change headset volume, press [ 

 ] , [ 

 ] key at headset mode. 

8. Auto answer function

    To answer an external or internal call by lifting from charge cradle, user can
    enable auto-answer function. At standby mode, enter menu mode, go to
    setup menu, select auto answer to function on.

[ OK/MENU ]

9

      To run room monitor function, two units are used : detector unit (listen) and
      monitor unit (play).
     To setup a detector, enter menu mode, go to function menu, select room
      monitor function on. The unit will lock at detector mode and wait for
      monitor unit to connect. Press [ESC] key to function off menu. Press 
      [        ] to return to standby mode. 
      To setup a monitor, press [INT] + detector unit number to connect to
      detector. Handset : Press [        ] key to quit room monitor function. 
    In case of external ring in during room monitor mode, detector will keep
      silent and monitor will be ring. To answer call, press [        ] key at
      monitor and detector will keep state at detector mode and wait for next
      connection. After phone call is finished, press [INT] + detector unit number
      to reconnect detector again.

10. Baby call function

      Baby call is a function to provide a quick dial out a predefine number by
      pressing any key. This is used for child or baby to call their parent just
      simple press any key on the keypad.

To turn on the function, enter menu mode, go to function menu, select

      baby call function on. A telephone number (up to 24 digit) should be input,
      this is for quick dial access.

.   Room monitor function

11. REGISTER

      Register or deregister a handset to or from selected base unit.
      Enter menu, select [SETUP], press [OK/Menu] to bring up sub-menus,
      select [REGISTER] and press [OK/Menu] to enter registration page and
      then select one of the following functions, press [OK/Menu] to enter each
      setting page.
      a. NEW REGISTER
          Having cordless base set on registering mode and then in registration
          page of the cordless handset, select [BASE UNIT 1] or [BASE UNIT 2] 
          to register and press [OK/Menu] to confirm and start registering.
      b. DEREGISTER
          Enter the [PIN NUMBER], press [OK/Menu], select the handset that is to 
          be deregistered and then press [OK/Menu] to confirm.
      c. SELECT BASE
          Select [BASE UNIT 1] or [BASE UNIT 2] to link, or select [AUTO
          SELECT] to link automatically if the handset is previously registered to 2
          base units, pressing [OK/Menu] to confirm.

8

9

Отзывы: