7
5. GETTING STARTED
5.1 Battery
Please use the battery authenticated by KingSun.
5.1.1 Battery install / uninstall / charge
Install:
-
Push the battery into the container
-
Cover the battery cap
Uninstall:
-
Power off the handset, open the back cover as shown (Fig.1)
-
Take out the battery (Fig.2)
Charge:
- Connect the charger adapter to the handset via the USB connector. (Fig.3)
- Connect the charger with the AC power supplier
- The handset will flash the charging animations when in power off state and refresh the
battery bar when in standby mode.
Notes:
-
The assembly battery can be used when you get it, and please completely charge it for
3 times.
-It will cost 3~4 hours to charge the battery, and we suggest you to charge the new
battery for 12 hours as to get higher performance.
-When the battery is being charged, it is normal that your charger and phone become
warm to touch.
-Pull out the charge when in charging completely state.
5.2 Insert the UIM card
Please insert the validated UIM card with your personal information from the Network operator
before using it.
