Kingston Technology PCREAD/ATA, Руководство пользователя

Страница: 9 / 24

Hardware Installation 3
PC Card Reader User’s Guide - Rev. A00 Kingston Technology Company
Installing the PC Card Reader
The PC Card Reader is designed to connect to your desktop PC’s IBM
compatible parallel port. The instructions beginning below describe how to
attach the PC Card Reader to your PC.
Step 1. Parallel Port Connection
1. Place the computer’s power switch in the OFF position.
2. If present, place the printer’s power switch in the OFF position.
3. If present, remove the cable extending between your computer’s
parallel port connector and your printer.
4. Plug the PC Card Reader’s 25-pin connector into your computer’s
parallel port connector. To make sure the PC Card Reader does not
pull loose, tighten the thumb screws as indicated below.
PC Card Reader to Parallel Port Connection
PARALLEL
POR
T
Use the thumbscrews on
each side of the connector
to secure the device to your
parallel port.