Kingston Technology PCREAD/ATA, Руководство пользователя

Страница: 15 / 24

Software Installation 9
PC Card Reader User’s Guide - Rev. A00 Kingston Technology Company
Software Installation
Software installation is the same for Windows 95/98 and NT 4.0 and takes only
several minutes to complete. The software installation is performed as follows:
1. Properly connect the PC Card Reader to your computer following the
instructions outlined earlier in this document.
2. Install an ATA compatible Type II PC storage card into the PC Card
Reader as described in the previous section.
3. Power-up your computer and allow it to boot completely.
4. Install the software installation diskette provided with your PC Card
Reader into your diskette drive.
5. From the Start Menu select “RUN.”
6. In the Open dialog box, type “A:\SETUP.EXE” or you can use the
Browse button to select the Setup file from the diskette.
7. Follow all screen prompts, which include: Software license
agreement, Parallel port sharing, file install location (default =
C:\FLASHDSK), folder name (default = FlashDisk Installer), and
begin copy files.
8. NT 4.0 installations have one additional prompt, which ask you to
select the SCSI controller type. In most cases you will only have one
choice “Kingston PC Card Reader.” Select
OK to continue.
9. Once the computer is restarted, your Kingston PC Card Reader is
ready for use.
Hot Swapping
Your Kingston PC Card Reader supports the hot swapping of PC storage cards.
This means that while the computer is powered up, you can both remove and
insert PC storage cards into the PC Card Reader.
Windows 95/98 will automatically and immediately detect when a PC storage
card is removed or inserted. If you double click on the
My Computer icon, you
will see all the storage devices attached to your computer. Each storage device
is represented by its own icon. When you remove the PC storage card, the icon
associated with that device will immediately disappear. When you insert