Kingston Technology DataTraveler 6000, Руководство пользователя, Страница: 6 / 139

Document No. 48000191-001.A00 DataTraveler
®
6000 Page 5 of 21
2. Review the licence agreement and click ‘
Next ’ (
Figure 3.2 )
. ( Note: You must accept
the licence agreement before continuing; otherwise the ‘Next’ button will remain
disabled
.)
Figure 3.2 – Licence agreement
3. Create a password to protect your data on the DT6000. Enter it in the ‘
Password ’
field, then re-enter it in the ‘ Password Confirmation ’ field, as seen below in
Figure 3.3
.
The password you create must meet the following criteria before the initialisation process
will allow you to continue:
1. Passwords must contain 8 characters or more (up to 128 characters).
2. Passwords must contain three (3) of the following:
- UPPER CASE, lower case, numeric and/or special characters (!, $, etc.)
You may also enter a password hint, but it is not a mandatory field. The hint field can be
useful in providing a clue as to what the password is, should the password ever be
forgotten. (
Note: The hint CANNOT be an exact match to the password. )