Kingston Technology DataTraveler 6000, Руководство пользователя, Страница: 4 / 139

Document No. 48000191-001.A00 DataTraveler
®
6000 Page 3 of 21
Recommendations
To ensure there is ample power provided to the DT6000 device, insert it directly into a USB
port on your notebook or desktop. Avoid connecting the DT6000 to any peripheral device(s)
that may feature a USB port, such as a keyboard or USB-powered hub.
*Note: See ‘Drive Letter Conflict’ on page 20.
Setup (Windows environment)
1. Insert the DT6000 into an available USB port on
your notebook or desktop and wait for Windows
to detect it.
•
Windows XP users will receive a ‘ Found
New Hardware ’ notification as seen in
Figure
2.1
.
•
Windows Vista/7 users will receive a device
driver notification as seen in
Figure 2.2
.
Once the new hardware detection is complete,
Windows will prompt you to begin the initialisation
process.
•
Windows XP users will see an AutoPlay
window similar to the one in
Figure 2.3
.
•
Windows Vista/7 users will see a different
AutoPlay window.
2. Select
the option ‘
Run
DT6000_Launcher.exe
’.
If Windows does not AutoPlay, you can browse to
the removable disk drive (
Figure 2.4
) and manually
execute the DT6000_Launcher program. This will
also start the initialisation process.
Figure 2.1 – Found New Hardware
(Windows XP)
Figure 2.2 – Device Driver Installation
(Windows Vista/7)