Kingspan Varisol DF, Руководство по установке

Страница: 7 / 32

The modular design of the Varisol collector means that any number of tubes can be
assembled to make up the required collector size. Since the mounting kit cross rails
are only supplied in 10, 20 and 30 tube sizes it is necessary to cut the rails to length if
an intermediate sized collector is required. The table below gives the required length
of rail for each given size. Burrs and sharp edges should be removed.
Examples:
❱
To make an 18 tube collector simply take a 20-way rail and cut to 1281mm.
❱
To make a 44 tube collector join a standard 20-way rail to a 24-way, the 24-way being
made by cutting a 30-way rail to 1708mm.
❱
In the case of a sloping roof mounted collector, the available rafter spacing should be
considered when sizing the collector to ensure that an appropriate side rail spacing can
be achieved.
Roof Kit Sizing
05
Collector Number of Kit Type Required Support Side Rail
Area tubes Rail Length Separation
m
2
mm mm
0.1 1 71
0.2 2 142
0.3 3 214
0.4 4 10 Tube Rail 285
0.5 5 712mm 356
0.6 6 427
0.7 7 498
0.8 8 569 350-450
0.9 9 640 350-550
1 10 712 500-600
1.1 11 783 500-600
1.2 12 854 500-600
1.3 13 926 500-700
1.4 14 997 500-700
1.5 15 20 Tube Rail 1068 600-800
1.6 16 1423mm 1139 600-900
1.7 17 1210 600-900
1.8 18 1281 600-1000
1.9 19 1352 600-1000
2 20 1423 600-1100
2.1 21 1494 700-1200
2.2 22 1565 700-1200
2.3 23 1637 700-1200
2.4 24 1708 700-1200
2.5 25 30 Tube Rail 1779 700-1200
2.6 26 2135mm 1850 800-1300
2.7 27 1921 800-1300
2.8 28 1992 800-1400
2.9 29 2063 800-1400
3 30 2135 800-1400