The Aeromax Plus heat pump is designed to operate with a standard heating
time switch and programmable room thermostat, providing space heating or
DHW according to demand. The unit has two modes of operation: one for space
heating through underfloor heating or radiators adjustable between 35°C and
55°C and a second for DHW preset at 60°C.
We recommend that you review the electricity tariffs from all suppliers in your
area and select one that will give you the optimum economy in relation to your
lifestyle and heating demand
Your heating system is controlled by a programmable room thermostat that allows you to
choose when to have your heating on and what temperature it should be when it is on. A
time switch allows you to choose when you want to make hot water. The programmable room
thermostat controls the temperature of the main living area while thermostatic radiator
valves control the temperatures of the radiators in other rooms.
The Aeromax Plus radiator system works at a lower surface temperature than traditional
central heating. This means that your radiators will take a little longer to warm up your home
but will give you a more even comfortable temperature.
Normally your installer will have ensured that your radiators are correctly sized for operation
with a heat pump.
Your heat pump supplies Domestic Hot Water at between 50ºC - 55ºC. This is stored in the
special hot water cylinder provided with your heat pump to ensure that you always have hot
water on tap.
Kingspan recommend that the hot water cylinder thermostat is set between 55/60 degrees C.
The cylinder immersion heater should be set at 60ºC - 65ºC.
HEATING AND DOMESTIC HOT WATER
SYSTEM CONTROLS
Page 4
HOW DO I USE IT?
AEROMAX PLUS AIR SOURCE HEAT PUMP PACKAGE
KINGSPAN HEAT PUMPS
