Kingsman ZVFB2410MVN, Руководство владельца по эксплуатации и установке

Страница: 16 / 26

16
ZVF2410 & ZVF2426 Brick Panel Installation
1. Remove Deflector Hood by tilting front of hood up and pulling towards you.
2. Remove Pull Screens & Rods from fireplace.
3. Remove accessories, Overlays, Designer Doors, and or Logs if installed.
4. Place Rear Brick Panel up against the back of the firebox, ensuring the notched portion is at the bottom, and the
beveled edge is at the top.
5. Loosen Brick Clip Screws, & rotate Brick Clips out of the way. Tilt & slide Side Brick Panels into position up
against the rear Brick Panel. Slide Brick Clips up against side Brick Panels & tighten.
6. Replace Deflector Hood, Rods & Pull Screens, accessories, and Log Set as per instructions.
Warning: Fireplace screen must be closed
while appliance is in operation.