Kingsman MDV30, Руководство по установке

Страница: 13 / 47

11
Caution: When using CVCK do not install Louver Assembly.
1.
Install optional Fan Kit (See Fan instructions).
2.
Fold the tall 8” standoffs up into position and mount them with the supplied screws.
3.
Bend the center tab on the four [4] Nailing Tabs 90° as shown below. These tabs are the standoffs for the side Framing.
4.
Place CVCK inside Fireplace door opening and, using the four [4] supplied #6 screws, fasten the CVCK to the inside
posts of the appliance.
5.
Using ten [10] DT screws, install the Top Heat Shield to the upper inside portion of the CVCK. A side cut-view is
provided to illustrate how the shield is installed. It is recommended that the Leading Edge Screws be installed before the
side screws.
6.
Position the appliance inside the Framing and secure it using the nailing tabs on the CVCK. Ensure that the Framing
does not exceed the standoffs bent in Step 2. Furthermore, it is recommended that the fireplace be fastened to the floor
with 4 screws as well.
7.
Once the CVCK Kit is on the fireplace, remove the top door screws, place the Top Door Shield on top of the door, &
replace screws through the Top Door Shield & door .
8.
The CVCK Kit is supplied with two [2] valve extension knobs. Align the notches and slide the extensions onto the valve
knobs.
9.
DO NOT brick or tile beyond the inside area of the CVCK Kit to allow for removal of the door and ventilation.
MDV31 - How to Install Clean View Kit (Z36 CVCK)