MQVL48 / MQVLB48 Glass Door Front Removal / Installation
To remove Glass Door Front:
1. MQVL48:
Remove [2ea] 10-24
wing nuts (or 3/8” nuts) to
remove the Side Cover Panels.
MQVLB48:
Remove [2ea] 10-
24 wing nuts (or 3/8” nuts) to
remove the Corner Covers from
MQVLB48 Peninsula Bay
fireplace. For
Corner Kits
see
MQVL48
above.
2.
Remove the [Qty 4] Wing Nuts
on the Upper Glass Retainer
above the Glass Door Front and
remove the Retainer.
3.
Loosen the [Qty 4] Wing Nuts
on the Lower Glass Retainer
but do not remove. Glass Door
Front can now be lifted out of
the fireplace.
4.
Installation is the reverse of
these steps.
NOTE:
Do not over tighten nuts as
glass could break.
MQVLB48 Peninsula Bay
Glass Door Side Removal
To remove Glass Door Side (for
Corner Kit Installation):
1.
Remove Glass Door Front as
described above.
2.
Use a screwdriver to remove
the Side Glass Cover.
3.
Remove the [Qty 2] Wing Nuts
on the Upper Glass Retainer
and remove the retainer.
4.
Remove the Glass Door Side.
5.
Remove the [Qty 2] Wing Nuts
on the Lower Glass Retainer
and remove the retainer.
Refer to VLBCK48 Corner Kit
Installation Instructions to install
Corner Kit.
NOTE: None of the components
from the Side Glass Door will be
reused when the Corner Kit is
installed.
Corner Covers x 2 (MQVLB48)
Side Cover Panel x 2 (MQVL48)
Side Cover Panel x 1 (VLBCK48 Corner Kit)
Upper Glass Retainer
Lower Side Glass Retainer
Upper Side Glass
Retainer
Side Glass Cover
X2
X4
X2
X2
Use caution when working with
glass. Wear gloves.
Suction Cups Recommended.
Glass must be centered when reinstalling.
Push Corner Covers tightly against gasket before tightening Nuts.
OR
OR
3/8”
X2
3/8”
X2
31
Содержание marquis ENCLAVE MQVL48BLPE2
Страница 53: ...Gas Conversion for Modulator PART C 53...
Страница 65: ...65...