Step 3: Install Burner Tray Filler Strips &
Place Media over Burner.
Filler Strips
must be installed before media is
placed onto burner.
Spread
Bronze Glass
evenly in burner tray.
Pilot Shield must not be covered, as a delayed
ignition can occur.
Refer to Manual for detailed instructions.
Step 4: Assemble the Wind Guard.
Step 5: Install Propane Cylinder.
Step 6: Install [1] AAA Battery (not supplied) into
Igniter.
Pilot Shield must not be covered
Follow the Lighting
Instructions in the
manual or on the
back of the Label
Plate to light the
appliance.
Tank Brace
4