Note:
Do NOT connect the camera to PC for charging. Instead use the 110V wall outlet.
The device will start up automatically and record as soon as power supplied, and
the device will save the last video file and power off automatically after cutting the
power supply.
14.2 Turning your camera ON/OFF
Auto Power ON:
KINGSLIM D2 Pro is designed to turn ON automatically when it
receives power, i.e. when the car engine is started.
Auto Power OFF:
The camera is also pre-configured to turn itself OFF automatically
within few seconds when the power gets disconnected, i.e. when the car key is
turned to LOCK position.
Note:
Some trucks/car’ s 12V cigarette outlet is always HOT, which means it provides
constant power even when the car is turned off and locked. If this is the case for
your vehicle, the auto ON/OFF feature will not work. And if you leave the camera
continuously recording when the car is turned off, the it will drain your car/truck’s
battery and you might not have enough power to start your car for next time. To
remedy this situation, you can do one of the two options:
①
Hardwire your dash cam to your car’s fuse box with KINGSLIM 3 lead auto trigger
hardwire kit. Visit
www.kingslim.net
to purchase one separately.
②
Change the connection in the fuse box for your 12V outlet socket which only
supplies power when car key is turned to ACC or ON position.
14. Charging
14.1 Connect the USB power cable into the USB power port of D2 Pro Dash Cam,
then plug the car charger into the cigarette lighter of your car.
Car cigarette lighter socket
Car cigarette lighter plug
D2 Pro Dash Cam
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
