KINGSLEY – BATE
Fine Garden Furniture
ASSEMBLY INSTRUCTIONS FOR THE TROLLY
LIFT OUT TRAY
DRAWERS
TOP FRAME BOTTOM FRAME
DRAWER FRAME END FRAME WITH WING
END FRAME W/O WING
* NOTE
A TENON
B MORTISE HOLE
STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood.
NOTE:
During assembly of the furniture please match all joints with the corresponding
letter or numbers stamped on the furniture.
STEP-II
Find the END FRAME W/O WING (should be the
one with num bers stamped on it). Lay this END
FRAME down first. Matching the num bers on the
END FRAME wit h those on the TOP FRAME,
BOTTOM FRAME, HANDLE BARS and
DRAWER FRAME, carefully line up all parts. Using a rubber mallet, evenly drive all the
tenons into the mortise holes as shown in the assembly photos.