STEP-V
the axle to th e wheel and back leg
ber mallet, gently knock the front
Connect
assemblies. Screw in by hand and finish with a ¾”
or standard adjustable wrench. Do not tighten too
hard, or the wheels will not turn.
STEP-VI
With a rub
and back leg assem
blies into their
corresponding places.
Be sure to match the
numbered tenons w ith the corresponding
mortise holes.
II
STEP-V
screws into the back leg braces to secure
hammer. You ould place the a
STEP-VIII
gs tight against the side rails, insert
Insert brass
the legs to the chaise fra me. Do not ham mer in the
screws, but drive them in with a proper screw driver.
With the legs tight against the side rails, insert the
locking dowels and drive them in gently with a
nding block between the ham mer and the dowel to
prevent marring of the wood.
If any dowels protrude, please do not force them in. Any
excess can easily be sanded away.
sh
s
With front le
the locking dowels and drive them in gently with a
hammer.
Again being careful not to mar the
wood.
If any dow els protrude, please do not
force them in. Any excess can easily be sanded
away.
Make sure to sand along the grain of the
wood to prevent scratch marks.
IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR
ING
* KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
1
7200 Gateway Court, Manassas, Virginia 20109
K
SLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE
DEALER NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU
FOR CHOOSING OUR FURNITURE.
IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY
Phone: 703-361-7000, Fax: 703-361-7001
