background image

www.kingsbottle.com (USA) 

www.kingsbottle.com.au (Australia)

 

11

OPERATION

PART V

  

OPERATING YOUR REFRIGERATOR

Each wine cooler includes an operating panel on the front of the unit. This operating panel includes several features to operate and control the temperature, 
light color and brightness. 

ON/OFF: 

Turns the wine cooler power on or off. 

TEMP. SET: 

Displays the desired temperature. 

TEMP. DISPLAY:

 Displays the actual temperature. 

UP / DOWN: 

Adjust the temperature preset value. 

LIGHT:

 Turns the interior light on/off, or change the light colors.  

LIGHT+UP

: Increase the light brightness;  

LIGHT+DOWN

: Decrease the light brightness. 

C/F SWITCH:

 Switch between °C and °F 

LIGHT ON/OFF, COLOR & BRIGHTNESS CONTROL 

1. Press the 

LIGHT

 button to turn the light on/off, or change the light color. The order of change is as follows: ON, red, orange, yellow, green, blue, purple, 

white, color changing, OFF. 
2. While holding down the 

LIGHT

 button, press the 

UP

 button to increase the brightness, or press the 

DOWN

 button to decrease the light brightness. 

Brightness is divided into 5 levels: 20%, 40%, 60%, 80% and 100%. 

SETTING THE TEMPERATURE CONTROL 

1. Make sure the power cord is connected to a properly grounded outlet. 
2. Press the 

ON/OFF

 button to turn the power ON. 

3. Press the 

C/F SWITCH

 button to choose and display Fahrenheit or Celsius temperature. 

4. Set the temperature as you desire by pushing the 

UP

 or 

DOWN

 button.  

NOTE:

 The desired temperatures may fluctuate depending on whether the interior light is ON or OFF, the ambient temperature, the location of the unit and 

the orientation of the bottles. The display is just a guide, be guided by how cold your drinks are at consumption. Remember units go into defrost mode, and 
this will show a higher display, it’s only for short periods and doesn’t have time to affect drink temperature. In general, once the unit has settled, it will keep 
products within 5°F (2°C) of the set temp easily in temperatures up to and beyond 100°F (38°C). 

TEMPERATURE SETTINGS FOR WINE SERVICE

 

Different varietals of wine require different temperature settings. The recommended temperature ranges for long term preservation of various wines is 
Red Wines: 52-64°F (11-18°C ); White Wines: 44-51°F (7-10°C); Sparkle Wines: 41-43°F (5-6°C).

1.

In the event of a power interruption, all previous temperature settings will be automatically saved and each compartment will return to the previous 
temperature setting.  

2.

If the unit is unplugged, loses power, or is turned off, there will be a 6 minute delay for the compressor to restart after the unit is powered ON. 

3.

When you use the wine cooler. for the first time or restart the wine cooler after having been shut off for a long time, there will be a few degrees variance 
between the temperature you select and the one indicated on the LED readout for the first few hours of operation. After a few hours of operation, the 
temperature will normalize to the displayed temperature.

0LEASE¬READ¬THE¬USER¬MANUAL¬CAREFULLY¬AND¬STORE¬IN¬A¬HANDY¬

place for later reference. 

The symbols you will see in this booklet have these meanings:

WARNING

6FGQQWK@MJGLBGA?RCQGLDMPK?RGMLAMLACPLGLEWMSPNCPQML?JQ?DCRW

CAUTION

6FGQQWK@MJGLBGA?RCQGLDMPK?RGMLMLFMURM?TMGBB?K?EGLERFC
?NNJG?LAC

TIPS & INFORMATION

6FGQQWK@MJGLBGA?RCQRGNQ?LBGLDMPK?RGML?@MSRSQCMDRFC?NNJG?LAC

ENVIRONMENTAL TIPS

6FGQQWK@MJGLBGA?RCQRGNQ?LBGLDMPK?RGML?@MSRCAMLMKGA?J?LB
CAMJMEGA?JSQCMDRFC?NNJG?LAC

Meanings of symbols used in this manual are shown below:

6FGQQWK@MJGLBGA?RCQLCTCPRMBMRFGQ

6FGQQWK@MJGLBGA?RCQ?JU?WQBMRFGQ

WARNING

s¬¬)F¬PRESSURISED¬AEROSOL¬CONTAINERS¬BEAR¬THE¬WORD¬

‘flammable’ and/or a small flame symbol,  

do not store them inside any refrigerator or  

freezer. If you do so you may cause an explosion.

s¬¬7HEN¬YOU¬DISPOSE¬OF¬YOUR¬OLD¬REFRIGERATORS¬AND¬FREEZERS¬

remove any doors. Children can suffocate if they get 

trapped inside. 

s¬¬4HIS¬APPLIANCE¬CONTAINS¬INSULATION¬FORMED¬WITH¬mAMMABLE¬

blowing gases. Avoid safety hazards by carefully 

disposing of this appliance.

WARNING

The refrigerator must be plugged into its own 

dedicated 220-240V, 50Hz AC electrical outlet.
The plug must be accessible when the refrigerator is 

in position.
It is essential the power point is properly earthed to 

ground. Consult a qualified electrician if you are unsure.
Don’t use extension cords or adapter plugs with this 

refrigerator.
If the power cord is damaged, have it replaced by a 

qualified service technician.
Unplug the refrigerator before cleaning it, or changing 

the light bulb to avoid electric shock.
Never unplug the refrigerator by pulling the electrical 

cord as this may damage it. Grip the plug firmly and 

pull straight out.
Choose a location for your refrigerator that isn’t too cold. 

The ambient room temperature should be above 10°C.
Stand your refrigerator in a dry place – avoid areas 

of high moisture or humidity.
Don’t put the refrigerator in frosty or unprotected areas 

like a garage or on the verandah.
Keep the refrigerator out of direct sunlight.
Don’t locate the refrigerator near stoves, fires or heaters.
When installed correctly, your refrigerator should:

 

–  Have adequate space at the back and sides 

for air circulation (refer to page 9).

 

–  Be aligned to the surrounding cupboards.

 

–  Have doors that will self-close from a partially 

open position.

WARNING

4#4'(4+)'4#069#40+0)

This appliance may contain a small quantity of environmentally 

friendly, but flammable, non-synthetic R600a refrigerant:

s¬¬%NSURE¬THAT¬THE¬TUBING¬OF¬THE¬REFRIGERANT¬CIRCUIT¬IS¬NOT¬

damaged during transportation and installation.

s¬4HE¬ROOM¬FOR¬INSTALLING¬APPLIANCE¬MUST¬BE¬AT¬LEAST¬M¬PER¬

8g of refrigerant. The amount of refrigerant charged in the 

appliance can be found on the rating plate on the appliance.

s¬+EEP¬VENTILATION¬OPENINGS¬IN¬THE¬APPLIANCE¬ENCLOSURE¬OR¬

in the built-in structure, clear of obstruction.

s¬$O¬NOT¬USE¬MECHANICAL¬DEVICES¬OR¬OTHER¬MEANS¬TO¬

accelerate the defrosting process, other than those 

recommended by the manufacturer. 

s¬4HE¬ROOM¬FOR¬INSTALLING¬APPLIANCE¬MUST¬BE¬AT¬LEAST¬M

3

 

per 8g of refrigerant. The amount of refrigerant charged 

in the appliance can be found on the rating plate on  

the appliance.

+/2146#065#('6;+05647%6+105

5#('6;

ON/OFF

UP

DOWN TEMP. DISPLAY LIGHT C/F SWITCH

TEMP. SET

Содержание KBU100WX

















Отзывы: