Kings Adventure domin8r 32'', Инструкция по эксплуатации

Страница: 8 / 16

8
OPERATING:
• Ensure the vehicle is secure by applying the parking brake or chocking the wheels
• Pull out the winch rope the desired length and connect to an anchor point.
• Disengaging the winch clutch allows rapid uncoiling of the rope for hooking onto the load or anchor point.
• The shifter tab located on the gear housing of the winch operates the clutch as follows:
• To disengage the clutch, move the clutch shifter tab to the “FREESPOOL” position. Rope could be
free spooled off the drum.
• To engage the clutch, move the clutch shifter tab into the “ENGAGED” position.
The winch is now ready for pulling.
• Recheck all cable rigging before proceeding.
• Plug in the winch hand control. It is recommended that the winching operation takes place from the
driver’s position to ensure safe operation.
• To commence winching operation, start vehicle engine, select neutral in transmission, maintain
engine speed at idle.
• Operate the hand control or the wireless remote control until the vehicle has been retrieved.
• Regularly check the winch to ensure rope is winding onto the drum evenly.
• Always use a winch cable blanket to minimise rope recoil.
NOTE:
• Never winch with your vehicle in gear or in park, which would damage your vehicle’s transmission.
• Never wrap the rope around the object and hook onto the rope itself. This can cause damage to the
object being pulled, and kink or fray the rope.
• Keep hands, clothing, hair and jewellery clear of the drum area and rope when winching.
• Never use the winch if the rope is frayed, kinked or damaged.
• Never allow anyone to stand near the rope or in line with the rope behind the winch while it is under
power. If the rope should slip or brake, it can suddenly whip back towards the winch, causing a
hazard for anyone in the area. Always stand well to the side while winching.
• Don’t leave the switch plugged in when winch is not in use.
CHECK THE WINCH CAREFULLY AND THOROUGHLY BEFORE OPERATING!
MAINTENANCE
It is highly recommended that the winch be used regularly (once a month). Simply power the rope
out 15m, free spool 5m and then power back in. This helps keep all components in good working
condition so that the winch can be relied on when needed. Contact your authorized outlet for technical
assistance and repairs.
SPARE PARTS:
A comprehensive range of spare parts is available. Please kindly contact the distributor or the local retailer.
WINCHING CAPACITY
• Pulling capacity is reduced as the incline increases.
• Winch is not intended as a load securing device.
NOTE:
The safety precautions and instructions discussed in this manual can’t cover all possible conditions and
situations that may occur. It must be understood by the operator that common sense and caution are
factors, which cannot be built into this product, but must be applied by the operator.