Kings Adventure domin8r 32'', Инструкция по эксплуатации

Страница: 14 / 16

14
INSTRUCTION FOR CUT OFF SWITCH
18
Instruction for Cut off switch
1. The cut off switch is for when the winch is not in use.
2. Failure to disconnect the power to the winch could result in the following problems
A. If the winch is not periodically maintained the wiring could become loosened and cause difficulties.
B. When in use it is normal for the motor to generate some heat. If it has not been used for some time check contacts and
terminals for corrosion which will interfere with the current flow
C. When the winch has been in a moist environment, or stored for winter contacts may have become oxidised causing problems
D. Do not operate the winch under salty, chemical and gaseous conditions for any length of time or the electrical parts may be
affected
3. When you are about to use the winch make sure the control switches are in the off position before connecting the cut off switch
or cable.
；
The function of the cut off switch is to
A. To prevent drainage of the battery
B.When not in use there will be no accidental operation of the winch
C,It can be used as an emergency cut off,
Note
：
1,Do not use the cut off switch as a control switch
2,When using the winch make sure the cable is firmly connected
3,When not in use make sure the power is disconnected
14
• The cut off switch is to be turned off when the winch is not in use.
• If the winch is not periodically maintained the wiring could become loosened and cause difficulties.
• When in use it is normal for the motor to generate some heat. If it has not been used for some time
check contacts and terminals for corrosion which will interfere with the current flow.
• When the winch has been in a moist environment, or stored for winter contacts may have become
oxidized causing problems
• Do not operate the winch under salty, chemical and gaseous conditions for any length of time or the
electrical parts may be affected
• When you are about to use the winch make sure the control switches are in the off position before
connecting the cut off switch or cable.
THE FUNCTION OF THE CUT OFF SWITCH IS TO :
• To prevent drainage of the battery
• When not in use there will be no accidental operation of the winch
NOTE
• Do not use the cut off switch as a control switch
• When using the winch make sure the cable is firmly connected
• When not in use make sure the power is disconnected