Kingray SA162F Скачать руководство пользователя страница 2

Страница: 2 / 4

INSTALLATION

Connect the lead from the antenna to the input of the amplifier and connect the television to one of the
outputs of the amplifier.

Connect the amplifier to the 240 volt mains and ensure the LED is lit.

Adjust the gain control for optimum performance. (SA164F model only)

Note: F Male to Pal Female adaptors have been included to ensure easy installation in the case PAL connections
are being used.

TECHNICAL ADVICE

1. Check there is no earth braid touching the centre conductor of the coax.

2. Is there now too much signal causing an overload to the TV?

Adjust the gain control for optimum performance. (SA164F model only)

Bare back cable with a Cable

Stripper or Stanley Knife

Slide on F Connector and crimp or use

a twist-on Connector

Содержание SA162F

Страница 1: ...esigned to distribute FM radio digital TV signals Both models are powered directly from the 240 volt mains power A 16dB maximum gain for both models The SA164F also has 8dB gain control on VHF The LED...

Страница 2: ...F model only Note F Male to Pal Female adaptors have been included to ensure easy installation in the case PAL connections are being used TECHNICAL ADVICE1 Check there is no earth braid touching the c...

Страница 3: ...aw our sole liability for breach of a condition warranty or other obligation implied by law is limited a in the case of goods we supply to any one of the following as we decide i the replacement of th...

Страница 4: ...relevant instruction manual or f goods where the serial number has been removed or made illegal 4 Warranty period 4 1 We provide the following warranty on GME and Kingray products No repair or replace...