manualshive.com logo in svg

Kinghome KPA07B2D, Инструкция по эксплуатации

Поделиться
Скачать
Kinghome KPA07B2D Скачать руководство пользователя страница 33

Service Manual

Installation and Maintenance

31

1. Select the installation location according to the require

-

ment of this manual.(See the requirements in installation 

part)

2. Handle unit transportation with care; the unit should not 

be carried by only one person if it is more than 20kg.

3. When installing the indoor unit and outdoor unit, a suffi-

cient fixing bolt must be installed; make sure the installation 

support is firm.

4. Ware safety belt if the height of working is above 2m.

5. Use equipped components or appointed components dur

-

ing installation.

6. Make sure no foreign objects are left in the unit after fin-

ishing installation.

1. Avoid contact between refrigerant and fire as it generates 

poisonous gas; Prohibit prolong the connection pipe by 

welding.

2. Apply specified refrigerant only. Never have it mixed with 

any other refrigerant. Never have air remain in the refrigerant 

line as it may lead to rupture or other hazards.

3. Make sure no refrigerant gas is leaking out when 

installation is completed.

4. If there is refrigerant leakage, please take sufficient 

measure to minimize the density of refrigerant.

5. Never touch the refrigerant piping or compressor without 

wearing glove to avoid scald or frostbite.

Refrigerant Safety Precautions:

Improper installation may lead to fire hazard, explosion, 

electric shock or injury.

Installation Safety Precautions:

connection pipe is not yet connected, air will be sucked in 

and cause pressure rise or compressor rupture, resulting in 

injury.

●Prohibit installing the unit at the place where there may be 

leaked corrosive gas or flammable gas.

If there leaked gas around the unit, it may cause explosion 

and other accidents.

●Do not use extension cords for electrical connections. If 

the electric wire

is not long enough, please contact a local service center 

authorized and ask for a proper electric wire.

Poor connections may lead to electric shock or fire.

●Use the specified types of wires for electrical connections 

between the indoor and outdoor units. Firmly clamp the 

wires so that their terminals receive no external stresses.

Electric wires with insufficient capacity, wrong wire  

connections and insecure wire terminals may cause electric 

shock or fire.

Содержание KPA07B2D


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды