Kinghome KM09HFDI, Инструкция по эксплуатации

Страница: 9 / 24

Free Match for North America
5
3.3 Installation of the Indoor Unit
(1). Requirements on the Installation Location
1) Ensure the hanger is strong enough to withstand the weight of the unit.
2) The drainage pipe is easy for connection.
3) No obstacle is in the inlet/outlet and the air circulation is in good condition.
4) Ensure the installation space shown in Fig.2 is left for the access to maintenance.
5) It should be far away from where there is heat source, leakage of inflammable, explosive
substances, or smog.
6) It is the ceiling type unit (concealed in the ceiling).
7) The power cords and connection lines of the indoor and outdoor units must be at least 1m
away from the TV set or radio to avoid the image interference and noise ( even if 1m is kept, the
noise may be produced due to the strong electromagnetic wave).
(2). Installation of the Indoor Unit
Insert the M10 expansion bolt into the hole, and then knock the nail into the bolt. Refer to the
Outline Dimension Drawings of the Indoor Unit for the distance between holes and see Fig.3 for the
installation of the expansion bolt.
Air conditioning unit
Hanger bolt
Anchor
Fig.3 Fig.4
Install the hanger on the indoor unit, as shown in Fig.4.
Install the indoor unit on the ceiling, as shown in Fig.5.
≤
48mm
Fig.5
CAUTION!
① .
Prior to the installation, please make a good preparation for all piping (refrigerant pipe,
drain pipe) and wiring (wires of the wired controller, wires between the indoor and outdoor unit) of
the indoor unit to make the further installation much easier.