Kingfisher KI 3600 Series, Краткое руководство пользователя

Страница: 2 / 27

QUICK REFERENCE GUIDE – KI 3600 Series Optical Power Meter English
• To remove the
connector adaptor
, press the button
on the rear of the instrument and pull off adaptor. This
may be easier with a patch lead in place.
• To turn on the instrument, press [POWER].
• To defeat
auto power-off
, hold down [2nd] while
pressing [POWER]. ‘Perm’ is displayed on the top
right of the LCD.
•
Low battery
is indicated with a battery symbol.
• To
scroll wavelength
, press [
λ
] or [
λ
].
• To switch between
absolute or relative
display
modes, press [Abs/Rel].
• To
stop / start display
update, press [HOLD].
• To
set reference
, hold down [2nd] while pressing
[SET REF].
• To toggle
log/linear
display mode, hold down [2nd]
while pressing [dB mW].
• To display the
max / min recorded power
, hold down
[2nd] while pressing [Max Min]. To reset this function,
press and hold down [2nd] and [Max Min] for 3
seconds.
• If a
test tone
is detected, the detected tone frequency
is displayed in Hz.
AUTOTEST OPERATION
• To start Autotest, press [Autotest] on light source and
wait a few seconds. No user action is required from
the meter side.
• To
display just one wavelength
at the time on the
power meter, press [
λ
] or [
λ
]. Press [
λ
] twice
to return to Autotest.
• Autotest remains for more than 8 seconds after signal
loss, to allow quick connection change.
• To exit Autotest, remove test lead or turn off light
source for more than 8 seconds.