Kingfisher KI 3600 Series, Краткое руководство пользователя

Страница: 15 / 27

QUICK REFERENCE GUIDE – KI 3800 Series Optical Light Source
English
• To remove the
connector adaptor
, press the button
on the rear of the instrument and pull off adaptor. This
may be easier with a patch lead in place.
• To turn on the instrument, press [POWER].
• To turn on the source, press [SOURCE
λλλλ
].
• To defeat
auto power-off
, hold down [PERM ON]
while pressing [POWER]. ‘Perm’ is displayed on the
top right of the LCD.
•
Low battery
is indicated with a battery symbol.
AUTOTEST OPERATION
• For Autotest operation, an Autotest compatible power
meter or loss test set is required.
• To start Autotest, press [Autotest] on the light source
and wait a few seconds. No user action is required
from the meter side.
• Autotest remains for more than 8 seconds after signal
loss, to allow quick connection change.
• To exit Autotest, press [AUTO TEST] or [Menu].
MANUAL OPERATION
• To
scroll wavelengths
, press [SOURCE
λλλλ
].
• To set
modulation
, press [MOD KHz].
• To adjust the
laser power level
, press and hold
[PERM ON] while pressing [MOD KHz] to increase or
[SOURCE
λλλλ
] to decrease the output power.
This function does not operate when in Autotest and is
not available on the LED source option.