KI 025 UM-5
7
General Safety Summary
Safety
These instruments contain no hazardous optical or electrical items.
The following information is for your reference:
When using this equipment, optical safety precautions should be
observed commensurate with the maximum available source power,
since most of this power can also be coupled out of the instrument.
Optical power levels in fiber optic systems can cause permanent eye
injury and damage to eyesight. Organisations and users operating
with these power levels MUST determine and observe relevant
safety precautions, which are beyond the scope of this manual.
Never look into the end of an optical cable or connector which might
be attached to an active source. Do not enable a laser when there is
no fibre attached to the optical output connector.
Optical magnifying instruments increase eye hazard. Always
disconnect the source before using an optical magnifier.
The laser module has a built-in safety circuitry which will usually
disable the optical output in the event of a fault condition, however
this cannot be guaranteed. An equipment assurance program is
recommended to check for safe laser operation.
This instrument is manufactured under an ISO9001 approved Quality
System, and conforms to CE Mark and C-tick EMC specifications.
Laser & LED Safety Information
Laser
Fabry-Perot Semiconductor Laser
λ
1550
nm
Max CW output power¹
<1 mW
Minimum beam waist diameter
9 µm
Minimum Numerical Aperture
0.1
Safety Class
IEC 60825-1 (1998) – International
Class 1
21 CFR 1040.10 (1995) – USA
Class 1
Maximum Permissible Levels for various standards & wavelengths:
IEC 60825-1 (1998) ²
1550 nm
10 mW
21 CFR 1040.10 (1995) ²
1550 nm
8.1 mW
Note 1: Max. CW output power is defined as the highest possible optical power that
the Source can produce at its output connector. Refer to specification sheet for actual
operating power.
Note 2: Max. permissible CW output power is the highest optical power that is
permitted within the appropriate laser class. Refer to specification sheet for actual
operating power.
Содержание KI 025 Series
