background image

 

11

 
 

 

LIMITED WARRANTY 

 

Thank you for purchasing a top quality

 KingCraft

 product. This

 Orbital Jig Saw with Laser 

item #5926-06 was tested and meets our stringent quality standards. This product is 

warranted to be free from manufacturing defects in original materials, including original parts, 

and workmanship until 

July 31

,

 2008

 or 2 years with proof of purchase excluding saw blade. 

 

The warranty is void if the defect is due to accidental damage, misuse, abuse, neglect, 

improper repair or alteration by unauthorized persons or failure to follow operation 

instructions provided with the product. This warranty does not apply to commercial use. 

 

The warranty is non-transferable and applies only to the original purchase and does not 

extend to subsequent owners of the product. Liability under this warranty is limited to repair, 

replacement or refund. In no event shall liability exceed the purchase price paid by the 

purchaser of the product. Under no circumstances shall there be liability for any loss, direct, 

indirect, incidental, special or consequential damage arising out of in connection with use of 

this product. This warranty is valid only in the United States of America. This Warranty gives 

you specific legal rights. However you may have other rights that vary from state to state. 

Some states do not allow limitation on implied warranties or exclusion of consequential 

damages therefore these restrictions may not apply to you. 

In case you find the product to be defective please send it within the warranty period to our 

service center. To avoid transport damages please send the product in the original packaging. 

In return you will either receive your repaired item, a new product or a refund. Please fill out 

the Warranty Card and send it together with the product and purchase receipt 
 
To arrange pick-up of the defective item please call our service center: 

 

Wachsmuth & Krogmann Inc. 

Tel: 1-888-367-7373 (Business hours Mon-Fri 9:00am-4:00 pm CT) 

Website: 

http://www.wk-usa.com

 

1800 Nicholas Blvd. 
Elk Grove Village, IL 60007 

USA   

 

WARRANTY INFORMATION 

 

 
 

 
 

 

 
 

 
 

 

 
 

 
 

 

Содержание MIQ-FE-65














Отзывы: