background image

 

16

 

LIMITED WARRANTY 

Thank you for purchasing a top quality KingCraft product. This KingCraft 8” 
Bench Grinder
 item #6318-06 was tested and meets our stringent quality 

standards. This product is warranted to be free from manufacturing defects in 
original materials, including original parts, and workmanship until October 8, 

2008 or 2 years with proof of purchase.  Grinding Wheel and light bulbs included 
with the Bench Grinder will be limited to 90 day warranty with proof of purchase. 

 
The warranty is void if the defect is due to accidental damage, misuse, abuse, 
neglect, improper repair or alteration by unauthorized persons or failure to follow 

operation instructions provided with the product. This warranty does not apply to 
commercial use. 

 

The warranty is non-transferable and applies only to the original purchase and 

does not extend to subsequent owners of the product. Liability under this 

warranty is limited to repair, replacement or refund. In no event shall liability 

exceed the purchase price paid by the purchaser of the product. Under no 

circumstances shall there be liability for any loss, direct, indirect, incidental, 

special or consequential damage arising out of in connection with use of this 

product. This warranty is valid only in the United States of America. This Warranty 

gives you specific legal rights. However you may have other rights that vary from 

state to state. Some states do not allow limitation on implied warranties or 

exclusion of consequential damages therefore these restrictions may not apply to 

you. 

In case you find the product to be defective please send it within the warranty 

period to our service center. To avoid transport damages please send the product 

in the original packaging. In return you will either receive your repaired item, a 

new product or a refund. Please fill out the Warranty Card and send it together 

with the product and purchase receipt 
 

To arrange pick-up of the defective item please call our service center: 
 

Wachsmuth & Krogmann Inc. 
Tel: 1-888-367-7373 (Business hours Mon-Fri 9:00am-4:00 pm CT) 
Website: 

http://www.wk-usa.com

 

1800 Nicholas Blvd.  
Elk Grove Village  

IL 60007, USA 

 

WARRANTY INFORMATION 

 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание 6318-06



















Отзывы: