KING P 069 Trimmy, Инструкция по эксплуатации

Страница: 4 / 23

Usage:
Inserting battery:
Turn the battery lid in an anticlockwise direction until the lines on the lid and unit point to
each other. Puli the lid off.
Insert the enclosed battery.
Switching the trimmer on and off:
Remove the protective cap.
Slide the on/off switch forwards or back wards to switch the unit on or off.
Clean the trimmer after each use as described in the chapter "cleaning".
Place the cutting head and afterwards the protective cap on the unit.
Trimming ear hair:
Switch the trimmer on and carefully insert it into ~ the outer ? parts of your ~ ear.
Carefully move the trimmer along hairy parts of your ear.
The unwanted hair wili be cut instantly.
Trimming nasal hair:
You can also slide the comb attachment no.1 and comb attachment no.2 on to the beard
trimming head. The sizes of the combs are indicated on the beard trimming head by
numbers. You can adjust the size of the comb according to your requirement by sliding
them up and down. (Comb attachment no.1: 2,4,6 mm, Comb attachment no.2: 3,5,7
mm)
Cleaning:
Please switch the appliance off.
Wipe the outer of your unit with a soft, damp cloth.
Please do not immerse your appliance in water or any other liquid.
If the unit is not to be used for over 3 weeks, take the battery off from the appliance.
Simply turn the blade holder clockwise to take out the whole blade, remove any hairs left
in the cutting head using the cleaning brush supplied after that, clean the cutting head
under the running water. The blades are stainless steel. Always keep the blades dry
completely, before putting them on your appliance again. Never wash the cutting head
under the water when it is fitted to your nose trimmer.