background image

The Mobile Antenna Setup screen should appear.  (Make sure your TV is on the correct input that your DISH Tailgater Pro is 

connected to.  Check input by pressing Source/Input button located on the side, back or front of your TV, or on your TV’s remote.)

 

When scan is complete:
 

 NEW UNACTIVATED RECEIVERS: 

The on-screen instructions will guide you through an initial setup and activation 

procedure (see the operation section for new unactivated receivers in your Owner’s Manual-see below).  Upon 

completion, you will need to call a DISH mobile antenna specialist at 

1-800-963-DISH (3474)

 to activate your receiver.

 

ACTIVATED RECEIVERS:

 Watch TV.  Enjoy!

Owner’s Manual:

Wally, DISH, Tailgater and ViP are registered trademarks of Dish Network, L.L.C.  KING is a registered trademark of Electronic Controlled Systems, Inc.  PN 23020 Rev B © 2017 KING

Follow the on-screen instructions to perform a scan.

Turn on your TV.

4

5

Mobile Antenna Setup

Install • Test Installation

   Receiver ID         XXXXXXXXXX-XX

 Smart Card ID    XXXXXXXXXX-XX

Please ensure your antenna is placed on a stable surface with a clear view

of  the southern sky.  If applicable, point the handle towards the north.

Step 1: Please select the state of your current location.

Step 2: Select Scan below to continue.

Pair Remote Control

Test Installation

Activate Receiver

Download Software

Summary

Please keep your remote control in

the vicinity of your receiver

throughout the installation process.

State:                                                        Select State

Scan

?

KC947

          First time use: You may get other screens prompting you to do things 

before the Mobile Antenna Setup screen appears (such as 

instructions on pairing your remote to the receiver.)
On subsequent use, if the Mobile Antenna Setup screen does not appear:
Wally receivers:  Unplug the Wally for 10 seconds, and then plug back in. 

(It may take several minutes for screen to appear.)

ViP receivers:  Press MENU, 6, 1, 1.  When Point Dish screen appears,  

highlight “Check Switch” and press Select.

Wally receiver screen shown.  Other receiver screens will vary.

For more information on operation, troubleshooting, roof installation, the warranty, and accessories for your DISH Tailgater Pro, 

refer to the included Owner’s Manual (Wally receiver version).  If you have a ViP receiver, you can access the Owner’s Manual 

(ViP receiver version) by going to 

kingconnect.com/product/dish-tailgater-pro 

and clicking on the orange “SUPPORT” box.

Отзывы: