9
10
OPERATION MANUAL
●
Unit Setting
1. There are 8 units in the laser distance meter, refer the units table below for
details of the 8 units.
●
50 Measurement Records
1. The laser distance measurer has 50 memories, and it automatically saves
every step during the measuring. You can always go back and see the
measurements you made.
2. Tap to find the icon, then enter to the mode.
3. Find the icon and press in the setting inside the application menu, tap
or to look for the measurements you need.
2. Tap to find the icon in the setting inside the application menu, tap
or to select the preferred unit and press to complete the setup.
●
Buzzer Volume
1. There are three sound volume, low, mid, and high to choose.
2. Tap to find the icon, then enter to the mode.
3. Find the icon and press in the setting inside the application menu,
tap or to select the sound volume.
meter
Length
Area
Volume
m
m²
m³
in
0'0"
1/32
1/32in
1/16in
1/8in
10/33
P
m³
feet inch
inch
inch
inch
尺
0'0"1/32
Front
Back
Left
Right
●
Calibrate the Digital Level
1. You can always re-calibration the accelerometer before use.
2. Tap
to find the icon, then enter to the mode.
3. Find the icon then enter to the calibration mode.
4. Follow the on-screen images and place the laser distance meter in the correct
position
.
5. Tap to activate the calibration in this direction.
6. Follow the four steps to complete the calibration.
7. After finishing the calibration, press to leave the mode.
43
2.612 m
2.039 m
2.012 m
2.484 m
81°
43
2.612
m
2.039
m
2.012
m
2.4
84
m
81
°
43
2.612 m
2.039
m
2.012 m
2.484 m
81
°
7DM1160
7D
M1
16
0
7D
M
1160