3
4
Measurement & Functions
●
Power On and Off
1. If the laser distance meter is off, tap the or to turn it on.
2. Tap and hold the for 3 seconds to turn the laser distance meter off.
●
Select Function Mode
Tap to enter mode selection, tap or to select
functions, tap to enter functions.
Tap to leave the mode.
●
Single Distance Measurement Mode
1. Move the laser onto the target and hold the laser
distance meter steady.
2. Hold your position and click to trigger the
measurement.
3. After a beep, the measured length shows on the screen.
●
Continuous Measurement Mode
When enter the mode, the laser distance meter keeps measuring.
Using this function to look for preferred distance quickly.
1. Tap to find the icon, then enter to the mode.
2. Tap to start the continuous measurement, the
max and min length display on the screen, on top
of the current distance.
3. Tap to clear the measurement.
●
Area Measurements Mode
In Area mode, the laser distance meter calculates the
result automatically after measuring all lengths.
1. Tap to find the icon, then enter to the mode.
2. Follow instructions on the screen to measure all necessary lengths; the area
shows on the screen with length and width.
3. Tap to return to the previous step.
●
Volume Measurements Mode
1. Tap to find the icon, then enter to the mode.
2. Follow instructions on the screen to measure all necessary lengths; the area
shows on the screen with length, width, and height.
3. Tap to return to the previous step.
●
Stake-Out Measurement Mode
Stake-Out splits a distance into several lengths in equal.
1. Tap to find the icon, then enter to the mode.
2. Tap to move to the desired set point.
3. Tap or to set the lengths.
4. Tap to start the measurement.
5. During the measuring.
a. The numbers on the top are the preset length.
b. The data in the middle is the multiple of the preset length.
c. The data at the bottom is the current distance.
d. There are two arrows on the top and bottom guide the moving direction to
the next stake.
6. Tap or to stop the measurement.