decelerate to keep the balance between the driver and the device itself.
Like riding bicycle, you have to keep left or right balancing by your body and the riding speed
Do not ride on slippery or bumpy surfaces, friction between the tire and the ground is essential
to keep the balance
4.2.Preparation
Find a proper spot
：
please don
’t ride in the highway or anywhere there are a lot of cars and
peoples, should not ride on the bumpy, gravel roads,
Warm up your body and be equipped with helmets, elbow, knee supporters if needed
Check the battery level, shack the unicycle to avoid potential unsafe factors like looseness,
abnormal sound, push the unicycle by hand to check whether it exists frictions between the tire
and body shell.
Find a friend to assist you if needed
Tie the auxiliary belt to the handle, adjust it to a proper length.
Please don
’t speed up and reduce suddenly in order to keep good maintenance.
Don
’t lean too much in order to not to fall, speeding is prohibited. In case of falling, given the
priority to body safety.
Refer to the following driving steps to start learning.
4.3 How to use
4.3.1 Start the unicycle
Grasp the handle with one hand, place the unicycle vertically on the ground, and unfold the
two treadles.
If the unicycle tilts either forward or backwards after power is switched on, then
wait until it reverts to upright position before riding.
Press the power key to turn on the unicycle, the battery level will illuminate and buzzer will
beep, then the vehicle is ready to use.
We suggest that you push the unicycle forward and backward to get an idea of the intensity of
acceleration and deceleration.
If the unicycle tilts either forward or backward after power is switched on, then wait unit it
