6
RDPR-HP-1 User’s Manual
Led IndICAtoRs
Power
With detect on
(Refer to the Mode Settings, page 11)
Solid - Ready for operation.
Blinking - Not ready for operation.
With detect off
(Refer to the Mode Settings, page 11)
Solid - Master Power switch is on.
Repeat 1
When lit, Radio 2 (left side) is repeating the received
signal from Radio 1 (right side).
Repeat 2
When lit, Radio 1 (right side) is repeating the
received signal from Radio 2 (left side).
Repeat 1
and
Repeat 2
When lit, Radio 1 and Radio 2 are repeating the
received signal from the radio connected to the
external port. (If configured “Cross-Band Linked
Repeater”, page 12)
sWItChes
Power
Master switch to power-up the RDPR-HP-1.
Repeater
Switches power to the “Radio 1 PWR” and “Radio 2
PWR” ports to enable/disable repeater function.
Radio 2/Mobile
Switches Radio 2 off when using the external radio
port.
VoX/CoR
Switches between voice/noise activated (VOX) or
carrier activated (COR) repeat function.
note: BK Radio portables must be set for VoX
operation.
duplexer
(ReQuIRes LZA3050)
Activates and deactivates the duplexer.
Refer to Duplexer Switch Option on page 10.
sW6
Refer to the Mode Settings on page 11.
