11
RELM/BK Radio
Mode settInGs
NOTE: Note to access the DIP SW6, remove the plastic cap plug as
shown in the diagram on page 5. Use a pencil or a small screw driver to
turn on or off the switch.
hAnG tIMe
(S1 and S2)
Switches 1 and 2 are used to set the repeater hang time as follows:
OFF ON
SW6
1
2
3
4
OFF ON
SW6
1
2
3
4
OFF ON
SW6
1
2
3
4
OFF ON
SW6
1
2
3
4
0 Seconds
1 Second
2 Seconds
3 Seconds
RAdIo deteCt
(S3)
OFF ON
SW6
1
2
3
4
S3 - “ON”.
If any or all of the radios are turned off or not plugged in
the power LED will flash and the repeater function will be
inoperable.
OFF ON
SW6
1
2
3
4
S3 - “OFF”.
The repeater function is operable even if one of the radios is
off or unplugged.
NOTE: This setting is used when only one of the RDPR-
HP-1 internal Radio Sets is being used in conjunction with an
external radio.
LInKInG ConfIGuRAtIons
(S4)
In-Band Linked Repeater
OFF ON
SW6
1
2
3
4
When an external radio is attached via the LINKCRDPR2 link
cable it will transmit whenever Radio 1 or Radio 2 receives a
signal.
Radio 2 transmits whenever a signal is received by the
external radio.
Radio 1 acts as receive only.
