King Quest VQ4100 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 56

King Quest VQ4100 Скачать руководство пользователя страница 31

Page 29

UC1000 Controller

4.7 Alarm Configuration

1. Press

POWER

to turn on the controller. Wait for the lights to stop flashing and for the

COAX

CONNECTION

light to remain on.

2. Simultaneously press and hold

POWER

and

SCAN

for five seconds. Controller begins beeping.

• Single Beep (beep...beep...beep)

Alarm is OFF.

• Double Beep (beep beep...beep beep)

Alarm is ON.

3. Press and release

SCAN

to toggle between the on and off conditions.

Beep pattern will change to indicate new condition.

4. When alarm is in desired condition, press and hold

SCAN

for 5 seconds to save in memory.

COAX CONNECTION

light will turn solid and

SCAN PROGRESS

lights will stay off.

5. Press POWER to turn off the controller.

ALARM OPERATION

If the coax cable is disconnected from the antenna unit or the controller while the system is turned on or in standby
mode, the controller will sound an audible alarm.

To turn off the alarm when it is sounding, press

POWER

until the controller turns off.

You can change the alarm condition at anytime by following the steps above.

«
...
29
30
31
32
33
...
»

Содержание VQ4100

























































Отзывы:

Нет отзывов