King Quest VQ4100, Руководство по устранению неисправностей

Страница: 17 / 56

Page 15
UC1000 Controller
4.2 Antenna Configuration
TO CHECK THE CURRENTLY PROGRAMMED SERVICE:
1. Press POWER to turn on controller.
• The COAX CONNECTION
light will flash for approximately 10 seconds and then remain on.
• SCAN PROGRESS
lights will flash 3 times to indicate the selected service configuration
.
See chart below to determine currently programmed service indicated by the lights that
flashed.
TO PROGRAM A DIFFERENT SERVICE:
1. With controller on, press and hold SCAN
for five seconds.
The COAX CONNECTION light and the SCAN PROGRESS lights that indicate the currently
selected service will begin flashing.
2. Press SCAN repeatedly to scroll thru the available service options.
3. When the correct lights turn on to show the desired satellite configuration, press and hold
SCAN
for five seconds to save in memory.
All lights will turn off except for the
COAX CONNECTION
light.
4. Turn off controller.
NOTE: The order of the lights corresponds to the order of the satellites listed.
EXAMPLE: DISH SD: Light 1 = satellite 110, Light 3 = satellite 119.