Page 12 of 20 Ver 1.1
GSM SMS Voice Alarm Dialer
GSM Power Monitoring Alarm
6.2 Setup Authorized number
(If you GSM Operator use different number format for SMS and Dial out,
then please see Notice 6, must setup as includes country code and not includes country code two
formats.)
Pwd
is the password, default is 1234.
Serial Number
= 1~6.
A
is the identification character of this command.
Function 1 Code
=1,2,3. It is for alarm receiving attribute setting.
=1 stands for when alarm occurrence, the GSM Dialer will dial as well as send SMS to this number.(The
SMS Number Format must be the Same as the Dial Number Format, include or not includes Country
code.)
=2 stands for when alarm occurrence, the GSM Dialer
only send alarm SMS to this number, doesn’t dial.
=3 stands for when alarm occurrence, the GSM Dialer
only dial this number, doesn’t sends SMS.
Function 2 Code
=1,2,3. It is for accessing GSM Dialer attribute setting.
(For monitoring Power function,
please set the function 2 code =3)
=1 stands for when this number dial to the GSM Dialer, will be rejected after the first ring, meanwhile, the
GSM Dialer will be changed to Stay Mode and not return SMS. This is very useful when the user come
back home or office to change the GSM Dialer to Stay mode with a FREE call from its mobile phone!
When the user leave the home or store or office, dial the GSM Dialer again, the GSM Dialer will be
changed to away armed mode and return SMS:
Armed
to ensure the armed operation is successful.
Tips:
When any number with this value call in the GSM Dialer, the GSM Dialer will change from Stay to Armed or Armed to
Stay, if the GSM Dialer in Disarmed mode, then the first time call in will change the GSM Dialer to Stay mode.
=2 stands for when this number dial to the GSM Dialer, will be picked up automatically and enter into listen
mode, the user can listen on-site sounds or noise immediately through the GSM Dialer
’s microphone.
(This
function available after 2014-03-15)
=3 stands for this number cannot access the GSM Dialer by dial in, will be hang up. Nor listen neither
change to Stay or Arm Mode.
Telephone Number
: authorized number, max. 18 characters,
E.g.: if you want to setup 13512345678 as the third authorized number, and the password is 1234, country
code is 0086, when alarm occurrence this number can receive both SMS and incoming from the GSM
Dialer, when dial to the GSM Dialer from this number, will refuse. Then you can send
12343A1#3#008613512345678#
to the GSM Dialer. Will return:
6.3 Inquiry the Authorized number
Tel1: Empty
Tel2: Empty
Tel3: 008613512345678-1-1
-1-1stands for function 1 code =1 and function 2 code =1 value.
Tel4: Empty
Tel5: Empty
Tel6: Empty
Pwd+Serial A+Function 1 Code+#+Function 2 code+#+Telephone #
pwd+A+#
