Page 8 of 8
King Pigeon Hi-Tech. Co., Ltd.
Ver 1.0
Industrial Ethernet Switch
●
When the device is ready to power on, please make sure the voltage input is wide voltage range, and the
positive/negative anodes of the power.
●
To avoid the electric shock, make sure the device is in good ground connection when operating.
●
Please do not open the device case at any time.
●
Please keep away from dusty and strong electromagnetism interference environment.
6.2 DIN-Rail&wall-mounted installation
6.3 Ground connection
Fix the ground wire on the ground screw of the switch
，
make sure good connection.
6.4 Power input
The Industrial Ethernet Switch provide an additional power supply to ensure it continue work while normal power
supply failure. Plug the power wire into the right position of 7-pin terminal block,then plug the terminal block into
standard power input port.The first power supply is V1+,V1-,the second power supply is V2+,V2-,power voltage
support 9~60VDC.One relay output,After the loss of a power input, the relay alarm output,Support NO and NC.
7.Warranty
1) This system is warranted to be free of defects in material and workmanship for one year.
2) This warranty does not extend to any defect, malfunction or failure caused by abuse or misuse by the
Operating Instructions. In no event shall the manufacturer be liable for any alarm system altered by
purchasers.
The End!
Any questions please help to contact us feel free.
