check the fan; if “Fan 1 Stop” is still displayed 10 seconds after
startup, please contact the
after-sales for technical support. At this point, the system will
automatically reduce load to ensure that protective systems continue
to operate; users can still charge devices without impact, but charge
times might become longer.
4.
Fan2 Stop:
The location of Fan 2 is as shown in the yellow frame:
Fan 2 is installed in the bottom of trolley. It can be easily seen when
rear door is opened. If “Fan 2 Stop” is displayed, please restart the
system and check the fan; if “Fan 2 Stop” is still displayed 10 seconds
after startup, please contact the
after-sales for technical support. At this point, the system will
automatically reduce load to ensure that protective systems continue
to operate; users can still charge devices without impact, but charge
times might become longer.
5.
Fan1/2 Stop:
If “Fan 1/ 2 Stop” is displayed, please restart and check the fans; if
Fan 1/2 Stop is still displayed 10 seconds after startup, please contact
the after-sales service center. At this point, the system will
automatically reduce load to ensure that protective systems continue
to operate; users can still charge devices without impact, but charge
times will become longer.
b.
Single port indicator menu
b.1 In the main menu, press and hold the “right” key to enter the single port
indicator menu