King Industrial KC-8359 Скачать руководство пользователя страница 3

GENERAL 

SAFETY INSTRUCTIONS 

GENERAL POWER TOOL SAFETY WARNINGS 

 
WARNING: Read all safety warnings, instructions, illustrations and specifications provided 
with this power tool. Failure to follow all instructions listed below may result in electric 
shock, fire and/or serious injury. 
 

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE. 

 
The term “power tool” in the warnings refers to your mains-operated (corded) power tool 
or battery-operated (cordless) power tool. 
 

WORK AREA SAFETY 

 

• Keep work area clean and well lit.

 Cluttered or dark areas invite accidents. 

• Do not operate power tools in explosive atmospheres, such as in the presence of 

flammable liquids, gases or dust.

 Power tools create sparks which may ignite the dust 

or fumes. 

• Keep children and bystanders away while operating a power tool.

 Distractions can 

cause you to lose control. 

 

ELECTRICAL SAFETY 

 

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not 

use any adapter plugs with earthed (grounded) power tools.

 Unmodified plugs and 

matching outlets will reduce risk of electric shock. 

• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, 

ranges and refrigerators.

 There is an increased risk of electric shock if your body is 

earthed or grounded. 

• Do not expose power tools to rain or wet conditions.

 Water entering a power tool will 

increase the risk of electric shock. 

• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the 

power tool. Keep cord away from heat, oil, sharp edges or moving parts.

 Damaged 

or entangled cords increase the risk of   electric shock.  

• When operating a power tool outdoors, use an extension cord suitable for outdoor 

use.

 Use of a cord suitable for outdoor use reduces the risk of electric shock. 

• If operating a power tool in a damp location is unavoidable, use a ground fault      

circuit interrupter (GFCI) protected supply.

 Use of an GFCI reduces the risk of electric 

shock. 

 

PERSONAL SAFETY 

 

• Stay alert, watch what you are doing and use common sense when operating a 

power tool. Do not use a power tool while you are tired or under the influence of 
drugs, alcohol or medication.

 A moment of inattention while operating power tools may 

result in serious personal injury. 

 

• Use personal protective equipment. Always wear eye protection. 

Protective    

equipment such as a dust mask, nonskid safety shoes, hard hat or hearing protection 
used for appropriate conditions will reduce personal injuries.

Содержание KC-8359











Отзывы: