King gates Modus 280, Руководство пользователя

Страница: 5 / 12

17
EN
3.5.2 – Securing the gear motor to the
fixing brackets
• Secure the gear motor to the rear bracket:
01.
Secure the gear motor to the bracket as shown in Fig. 7 using
the screws, washers and nuts supplied;
Fig. 7
02. Fully tighten the nuts to the screws.
• Install the arms onto the motor:
01.
Secure the arm onto the gear motor using the screw;
Fig. 8
02.
Fix the two arms to each other using the pin and the seger
Fig. 9
;
Fig. 9
• Secure the gear motor to the front bracket:
01.
Secure the gear motor arm to the bracket as shown in Fig. 10
using the pin and seger supplied;
Fig. 10
02. Tighten the seger fully onto the pin seat;
3.5.3 – Installation of the front fixing
bracket
01.
The front bracket must be secured to gate leaf;
02. Define the front bracket position height in accordance with Fig. 4 ;
03. Fix the bracket to the solid section of the gate leaf Fig.11 .
Fig. 11
3.5.4 – Installation and adjustment of
the motor limit switches
Adjust the gear motor opening and closing limit switches:
01. Release the gear motor as shown in Fig. 12 ;
Fig. 12