King gates ISTBJV01, Инструкция по эксплуатации

Страница: 7 / 18

Before installing the product ascertain that safety conditions are observed according to the law, rules and regulation.
Use personal safety devices and locate warning signs on the motorized gate.
Unfulfilment of the below listed direction will release the King gates srl from any responsibility for
damage caused to people or things.
-Ascertain the intigrity of the packing when opening it.
-In case of anomalies in the functioning, turn immediatly off the gear-motor, disconnect electrical power and operate the gate
manually the problem has been found and salved.
-Do not modify the product in any part.
-Only authorized and qualified staff is alloned to disassemble the product.
-Prevent any part of the automation from being next to any source of heat or in contact with liquid substances.
-Use only adeguate power supply cables.
-To optimize the functioning of the automation, King gates accessories only.
-Disposal of waste material has to observe local regulations.
-Installing, testing and first functioning have to observe the laws in force.
WARNINGS
MAIN FEATURES
TYPICAL SYSTEM
1 Gear-motor
2 Photocell
3 Flashing-light
4 Key selector
5 Adaptor arm
Power supply 230
Motor power supply 24
Electrical input 0.8
Working temperature -20 ÷ +55
10 Max dimensions sectional doors
10 Max dimensions overhead doors
M8, Z18 Transmission gear
9 - 16 Speed
60
414x264x110
Frequency of use
37
Motorgear dimensions
(Vac 50Hz)
(Vdc)
(A)
(°C)
(m )
2
(m )
2
(cm/sec.)
(%)
(mm)
Slide thickness
Limit switch (mm)
Encoder with mechanical stop
230
24
1.3
9 - 16
-20 ÷ +55
17
14
M8, Z18
60
414x264x110
37
Encoder with mechanical stop
Rolls 1200 Rolls 700
Max thrust 700 (N)
1200
TECHNICAL SPECIFICATIONS AUTOMATION
Transformer power supply 230
Control unit power 230
Max current peak from the motor 8
Accessories power 24 (400mA)
-20 ÷ +55 Environmental operating temperature
230 (max 40W) Courtesy light
Activated by remote control Courtesy light operation
433 MHz incorporated with 180 storable codes Receiver
(Vac)
(Vac)
(A)
(Vdc)
(°C)
(Vac )
24 (max 15W) Flash light (Vdc)
Star GDO 100
Motor output 24 (max 100Watt) (Vdc)
TECHNICAL SPECIFICATIONS STAR GDO100
1
2
2
3
4
1
2
2
3
4
5