ASSEMBLY
8) Now the sandblast cabinet gets installed on top of the wire mesh bracket. It is
recommended to do this step with the help of another person. Once positioned, the
cabinet and all the components installed previously all need to be secured together
from the inside of the cabinet using 14 pan head screws (A) Fig.9 and hex. nuts.
Note: Once the cabinet is secured to the stand frame, go back and securely tighten all
pan head screws which secure the legs and the shelf.
9) Slide the large media hose (A) Fig.10 onto the media collecting pipe (B). Connect the
other end of the large media hose to the large opening (C) of the sandblast gun (D).
10) Connect an air hose (E) Fig.10 (not included) from your compressor (compressor
capable of maintaining 15-25 CFM at 40-80 PSI) and insert the air hose into the small
opening (F) at the front of the cabinet, as shown. Install a quick connect fitting (G)
(not supplied) at the end of the air hose.
Note: Because of the variation in air supply systems, a standard 1/4” NPT air inlet is not
provided. If you want to use a 1/4” NPT air inlet, simply unscrew the standard inlet (A)
Fig.11 and replace it with a 1/4” NPT air inlet (B) (not supplied).
*DO NOT OPERATE THIS SANDBLAST CABINET AT OVER 116 PSI.
11) Connect an 1/4” NPT air inlet (H) Fig.10 (not included) to the sandblast gun (D).
Connect the 1/4” NPT air inlet to the quick connect fitting.
12) Install the 2-1/2” dust port (A) Fig.11 to the rear of the cabinet using 4 small pan head
screws, washers and hex. nuts. It is highly recommended to connect a vacuum or a
dust collector to the 2-1/2” dust port. This will greatly reduce airborn dust inside the
cabinet, increasing visibility. If the dust port is not used, it can be blocked by using
the dust port cover (B).
13) This Sandblast Cabinet comes with an LED light inside the cabinet. To use the LED
light, connect the power adaptor connector (C) Fig.12. Connect the 120V plug end
(D) into a suitable power outlet, and turn the LED light on by using the On/Off switch
(E) at the front of the cabinet.
FIGURE 9
FIGURE 10
FIGURE 11
FIGURE 12
ASSEMBLY
