MAINTENANCE
FREQUENT INSPECTION AND MAINTENANCE
The tool should be inspected and maintained frequently. Check and make sure the power
cord, internal wires, plug and switch are in good condition. Check the wheel, bearings and
driving parts also. Do not allow brake fluid, gasoline, petroleum-based products such as
penetrating oils to come in contact with plastic parts. They contain chemicals which can
damage, weaken or destroy the motor housing. Service should be done by a qualified
service technician using identical replacement parts.
CLEANING WATER RESERVOIR WITH WATER
After operating your wet/dry sharpener, the water
reservoir will have accumulated material from hand
tools and wheel. It is important to keep the water
reservoir clean.
WARNING!
Unplug power cord before cleaning
water reservoir, risk of electrocusion. NEVER
LEAVE WATER IN YOUR SHARPENER, the wheel
will absorb water where submerged and turn off
balance. It may freeze and crack if kept in an
unheated space.
1) Tilt and drain all water from the water reservoir
through the drain spout (A) Fig.7 at the rear of the
sharpener.
2) Fill the water reservoir with water to flush out
accumulated material.
REPLACING SHARPENING WHEEL ASSEMBLY
WARNING!
Unplug power cord before changing
sharpening wheel.
A replacement sharpening wheel (model KM-096) is
available, follow these instructions to change wheel;
1) Flip the wet/dry sharpener upside down and
remove the 4 screws that fix the lower and upper
housings. Flip wet/dry sharpener back onto its
four rubber feet and pull off the upper cover.
2) Slip the wheel belt (A) Fig.8 off the wheel pulley.
3) Undo and remove the two fixing plates (B) on both
sides by removing the four pan head screws (C).
4) Remove the wheel and shaft assembly (D).
5) Remove the C-clip (A) Fig.9 and slide wheel pulley (B) off the shaft. Slide both brass
bushings (C) and four washers (D) off the shaft.
6) Reinstall all parts in steps 1-5 in reverse order using your newly purchased wheel and
shaft assembly (model KM-096).
FIGURE 7
FIGURE 8
FIGURE 9
