background image

ASSEMBLY 
 
ATTACHING WORK LIGHT HEAD TO BASE 

Place the base (A) Fig.4 on a flat surface. Position 
the U-Shape bracket (B) of the work light head onto 
the base (A) as shown in Fig.4. Use the lock knob 
(C), flat washer and spring washer to secure the 
work light head on the base.  
 
 

OPERATION 
 
ADJUSTING THE LIGHT DIRECTION

 

Your work light can be tilted vertically up to 30° 
down or 90° up. To adjust the light direction, loosen 
the side locking knobs (D) Fig.4. Adjust the work 
light head to desired position, and retighten knobs. 
 

ON/OFF SWITCH

 

Your work light is equipped with a weather            
protected sealed ON/OFF switch (A) Fig.5 located 
on the back side of the work light. Press the switch 
once to turn the work light on and press the switch 
a second time to turn it off. Always turn the work 
light off before unplugging from power source. 
 

MAINTENANCE & SERVICE 

 

 
Your work light requires very little care and         
maintenance. Simply clean the lens regularly with a non-abrasive cleaner. Use similar 
care for the base and U-bracket. When servicing, use only identical parts.  Use of any 
other parts may create a hazard or cause product damage. Contact a King Canada      
service centre for identical replacement parts. 
 

WARNING:

 Always make sure the work light is unplugged and completely cool before 

attempting to clean it. 
 

RECYCLING 

 

Do not dispose of electrical appliances as unsorted municipal waste, use separate     
collection facilities. Contact your local government for information regarding the collection 
systems available. If electrical appliances are disposed of in landfills or dumps, hazardous 
substances can leak into the groundwater and get into the food chain, damaging your 
health and well-being. 

ASSEMBLY, OPERATION 

& MAINTENANCE

FIGURE 4

FIGURE 5

PARTS DIAGRAM & PARTS LISTS

 

Refer to the Parts section of the King Canada web site for the most updated parts diagram 
and parts list.

Содержание KC-4001LED








Отзывы: