background image

IMPORTANT INFORMATION

2-YEAR 

 

LIMITED WARRANTY  

FOR THIS TWIN LED WORK LIGHT  

KING CANADA TOOLS

 

OFFERS A 2-YEAR LIMITED WARANTY  

FOR DOMESTIC USE.

PROOF OF PURCHASE 

Please keep your dated proof of purchase for warranty and servicing purposes. 
 

LIMITED TOOL WARRANTY 

King Canada makes every effort to ensure that this product meets high quality and 
durability standards. King Canada warrants to the original retail consumer a 2-year 
limited warranty as of the date the product was purchased at retail and that each 
product is free from defects in materials. Warranty does not apply to defects due 
directly or indirectly to misuse, abuse, normal wear and tear, negligence or      
accidents, repairs done by an unauthorized service center, alterations and lack of 
maintenance. King Canada shall in no event be liable for death, injuries to persons 
or property or for incidental, special or consequential damages arising from the use 
of our products.  
 
To take advantage of this limited warranty, return the product at your expense 
together with your dated proof of purchase to an authorized King Canada service 
center. Contact your retailer or visit our web site at www.kingcanada.com for an 
updated listing of our authorized service centers. In cooperation with our authorized 
serviced center, King Canada will either repair or replace the product if any part or 
parts covered under this warranty which examination proves to be defective in 
workmanship or material during the warranty period. 
 

NOTE TO USER

 

This instruction manual is meant to serve as a guide only. Specifications and       
references are subject to change without prior notice. 

 
 
 
 
 
 
 

 

KING CANADA INC. DORVAL, QUÉBEC, CANADA H9P 2Y4 

 

www.kingcanada.com

Содержание KC-3002LED-ST









Отзывы: