King Canada 8245RN Скачать руководство пользователя страница 8

Страница: 8 / 9

OPERATING YOUR NAILER

OPERATING YOUR COIL ROOFING NAILER

WARNING! protect your eyes and ears. Wear Z87 safety glasses with side shields. Wear hearing

protection. Employers are responsible for ensuring the user or anyone near the nailer wears the

above mentioned safety protection.

WARNING! Check and replace any damaged or worn components.

• Add one/two drops of 30W oil for air tools into the air inlet.

• Install a quick connect fitting to the coil roofing nailer.

• Connect the coil roofing nailer to an air compressor using a 3/8” I.D. hose. Make sure the magazine

does not contain any nails and that the air hose has a rated working pressure exceeding 200 psi and

a female quick coupler.

• Regulate the air pressure to obtain 70 psi. Check the operation of the contact safety trip mechanism fol-

lowing the instructions in this manual.

• Disconnect the coil roofing nailer, then load magazine with nails following loading instructions.

• Reconnect the air hose to the coil roofing nailer air inlet.

• Test for proper nail penetration by driving nails into appropriate scrap material. If the nails do not achieve

the desired penetration, regulate the air pressure to a higher setting until the desired penetration is

achieved. Do not exceed 120 psi.

Содержание 8245RN








