background image

SAFETY INSTRUCTIONS

• Read and understand this manual and all the safety instructions before operating this nailer. If 

you have any questions, please contact our authorized service centres or retailers for help. 

 
 
 
 
 
• Never allow the use of flammable gases as a power source for the nailer. Use filtered,            

lubricated and regulated compressed air only. 

 
 
 
 
 
• Never use gasoline or other flammable liquids to clean this nailer. Vapors in the nailer will ignite 

by a spark and cause the nailer to explode. 

 
 
 
 
 
• Do not exceed the maximum permissible operating pressure of this nailer (120 PSI). 
 
 
 
• Disconnect the nailer from its air supply before clearing jams, servicing, adjusting and while the 

nailer is not in use. 

 
 
 
 
• Do not keep the trigger pulled when carrying or holding the nailer. Never carry the nailer by the 

air hose or pull on the air hose to move the nailer. 

 
 
 
 
 
• At the workplace, always wear protective equipment such as Z87 safety glasses, hearing and 

head protection.  

 
 
 
 
• Do not use a check valve or any other fitting which allows air to remain in the nailer. 
 
 
 
 
• Do not place your hand or any part of your body in the nail discharge area of the nailer when 

connecting or disconnecting from the air supply. 

 
 
 
 
• Never point any operational nail driving tool at yourself or at any other person. 

Содержание 8201NL










Отзывы: