Kinetik Wellbeing 842/5773, Руководство пользователя

Страница: 16 / 29

Deleting the Memory
While the unit is off, press the MEM button to switch the unit on. Then press the MEM button again so
that reading measurements are displayed. The memories shown will be from the User that has taken the
most recent measurement (which will be indicated by U1/User 1, U2/User 2 or U3/User 3 flashing on screen).
• If you want to delete the memories of another User, press the START/STOP button while the unit is off.
Press the MEM button to change to a different User and confirm your selection by pressing the
START/STOP button once. Before the device inflates, press the START/STOP button again to turn the
monitor off.
When the reading measurements for the desired User are displayed on screen, press and hold the SET
button for 4 seconds. Press the SET button again to alternate between ‘DEL NO’ and ‘DEL YES’. Confirm
by pressing the START/STOP button.
The above procedure will delete the entire memory bank, not just a single measurement.
Once deleted, the memory cannot be recovered.
15
请
用AI或EPS
档
案印刷。
PDF文
档
只供参考，不可用于印刷，
敬
请
留意。